How to open a PS4 command: step by step

In this article we will teach you how to open a PS4 command in a simple and fast way. We will explain step by step everything you need to know so you can do it at home.

What kind of screaming do I need to open a PS4 control?

Disassembling a PS4 control can be a bit intimidating, but it is not as difficult as it seems. The first thing you need is a Phillips screwdriver. If you don’t have one, you can use a star screwdriver or a flat screwdriver.

Before starting, make sure the control is off. Then remove the batteries and disconnect the USB cable.

With the screwdriver, remove the 6 screws found at the bottom of the control. Then, lift it carefully to separate it into 2 pieces.

The top of the control will be easily separated. The lower part requires a little more strength, but you should not have any problem.

Once you have separated the 2 pieces, you will see the buttons and the joystick. If you need to replace them, now is the time. If not, it simply puts the control again and replaces the screws.

What to do if the PS4 command does not work?

Have you had problems with PS4 command? Doesn’t it work as it should? Well, don’t worry, we will give you some advice on how to solve the problem.

First of all, make sure the command is correctly connected to the PS4. Check the cables and connectors to make sure there is no problem.

You can also try to reset the command. To do so, hold the L1 + L2 + R1 + R2 + Start + Select buttons for 10 seconds. The command will be reset and should work properly.

Another thing you can do is update the firmware of the command. To do so, you need to download and install the update software from the Sony website. Follow the instructions indicated in the software and the command should be updated correctly.

If none of the previous solutions works, then you probably have to send the command to Sony to repair or change it. We hope that these tips have been useful to you and that you can solve the problem with the PS4 command.

How to turn a new PS4 control?

How to turn a new PS4 control?

Are you ready to play your favorite games in the PS4? Sure yes, but what about your control? If you have not used one of the new PS4 controls, you may not be sure how to turn it on. Here is a brief guide to help you get control of your new PS4 and ready to play.

First of all, make sure the PS4 control is completely loaded. If it is not loaded, connect it to the PS4 using the USB cable that was supplied with the console.

Once the control is completely loaded, press the PS button in the control. The control will ignite and the PS4 will make a subtle sound to indicate that it has been connected.

Now that the control is on, press the Share button in the control. This will open the screen capture window on PS4. If you do not see the screen capture window, you may be able to log in to your PlayStation Network account.

Once you are in the screen capture window, press the Options button on the control. This will take you to the control configuration screen. Here you can configure the control to fit your personal needs.

Finally, be sure to save your changes and then get out of the configuration screen. Now you are ready to play your favorite games in the PS4 with your new control.

What is the name of the PS4 command entrance?

The PS4 control entrance is a slot at the top of the PS4 control that is used to connect the USB cable to command. It can also be used to connect other accessories to command, such as a wireless headset.

Leave a Comment