Have you forgotten the combination of your lock and you don’t know how to open it? Do not worry, in this article we will teach you to open a lock with combination in a few simple steps.
Table of Contents
How does a lock open with combination?
There are many types of locks with combination, but they all open in the same way. To open a lock with combination, you must first find the lock mark. Then, you must turn the ring of the lock to the right until you feel it stops. Next, you must turn the lock ring to the left until you reach the first mark. Then, you must turn the ring of the lock to the right until you reach the second brand. Finally, you must turn the lock ring to the left until you reach the third and last brand. If you have followed these steps correctly, the padlock will open.
How is a code lock reset?
How is a code lock reset?
If you have a code padlock that needs to be restored, you can do it at home with a little sandpaper. Here is a step by step to reset a padlock with key:
1. Place the lock on a flat surface and make sure the key is in the open position.
2. Use a sandpaper sheet to sand the upper and lower part of the key. This will help soften the roughness and allow the key to move more freely.
3. Place the key in the position of closing and wander it to the right until you feel it stops.
4. Now turn the key to the left until the brand at the bottom of the key is aligned with the brand in the body of the padlock.
5. Turn the key to the right and then to the left until you feel that the key stops.
6. Remove the key and turn the reset button in the body of the lock until the key can be extracted.
7. Place the key to the position of opening and rotates the Reset button until the key can be extracted.
8. Now turn the key to the right until the brand at the bottom of the key is aligned with the brand in the body of the padlock.
9. Turn the key to the left and then to the right until you feel that the key stops.
10. Remove the key and turn the reset button in the body of the lock until the key can be extracted.
11. Place the key re -opened and turn the Reset button until the key can be extracted.
12. Now turn the key to the right until the brand at the bottom of the key is aligned with the brand in the body of the padlock.
13. Turn the key to the left and then to the right until you feel that the key stops.
14. Remove the key and turn the reset button on the body of the padlock until the key
How to open a master 3 -digit combination lock?
How to open a master 3 -digit combination lock?
Have you forgotten the combination of your 3 -digit mastery lock? Do not worry, here we explain how to open it.
First, you need to find the small slot at the top of the padlock. Then, use a screwdriver to turn the wheel in the slot towards the left. Once the wheel is in the right position, you must hear a click.
Now, turn the wheel to the right until you feel another click. This means that you have found the first digit of the combination. Continue turning the wheel to the right until you find the second digit of the combination. Then, turn the wheel to the left until you find the third digit.
And you already have it! Your lock must be open. If it is not, repeat the process until you have opened it.
How to recover the key to a master lock?
How to recover the key to a master lock?
Did you lose the key of your Master padlock and you don’t know how to recover it? Do not worry, here we will explain how to do it.
There are different methods that you can use to recover the key to a master lock. The first method is to use a screwdriver to open the lock. To do so, you must first find the opening button at the top of the padlock. Then, using a screwdriver, press this button down.
Another method you can use is to use a ganzúa. To do so, you will need a quality ganzúa and a little patience. The first thing you should do is insert the ganzúa into the lock slot. Then, you must move it up and down until you find the weak point of the padlock.
Once you have found this weak point, you must move the ganzúa to the side to open the lock. If you fail to open it in this way, you can try to use a hot air gun. To do so, you must point the hot air gun to the rear of the padlock. Then, you must press the trigger to heat the metal.
Once the metal is hot, you must use a screwdriver to open the lock. If you still can’t open it, then you can try to use a metal saw. To do so, you must insert the Sierra at the top of the padlock. Then, you must move it to the side to open it.
We hope these tips help you recover the key to your Master padlock.
